As an Amazon Associate I earn from qualifying purchases.
GS Power #ad - No drilling needed. Compatible with toyota Tacoma 2016-2020 . Sold as pair driver and passenger side. Require only a wrench or socket for installation. May also be used for CB antenna or whip flag.
Nilight #ad - Universal: it can be used to install almost all LED Light Pods. Easy to install. Stable & durable: five Screws are enough to tight the light with the car cover tightly. No any damage to the car surface paint. Anti-slip surface: the surface contacting with the front cover of the car covers a multi-layer non-slip composite material and loss prevention materials to ensure that the contact surface of the bracket will not damage the car surface paint.
Nilight #ad - Fit type: Universal Fit. Package includes: 2PCS Side Pillar Mounting Bracket. Please check the fitment. Fitments: 2014-2019 polaris rzr xp 1000; 2015-2019 polaris rzr 900 .
High-quality material: side pillar Mounting Brackets made of high-quality metal, the surface is black powder coating, solid and waterproof.
Nilight #ad - No drilling &anti-slip design: no drilling is required, just clamp the kit and tighten up. Package include: 2 x 304 stainless steel brackets Lamp is not included.
2 x hex Allen wrench. The clamp kit comes with anti-slip teeth and rubber pad to make sure a firm installation and no scratches left on the surface of the hood. As only the max limit of the clamp board thickness on the vehicle is within 8mm.
Rago Fabrication #ad - Made in the usa - made from high quality steel and powder coated black, these extensions are rigorously tested to ensure maximum performance and durability right here in the United States. It is compatible with most manufacturer's ditch light brackets in addition to Rago's ditch light brackets.
Our extension is compatible with Rago's Ditch light brackets & with most ditch light brackets on the market.
Easy installation - these bracket extensions are easy to install, and can be done in minutes. Compatibility - our ditch bracket extensions are suitable for most SUVs, truck, and Jeeps. Perfect fitment - our brackets extensions do not interfere with the opening of your hood.
Nilight #ad - Main purpose: specially designed for 2005-2015 2nd Gen Toyota Tacoma, provides a convenient way to mount aftermarket lights at windshield base for better side way visibility on your night ride.
Simple installation: just firstly remove hood hinge mount bolts, line up ditch light bracket to the mounting holes, and then bolt on and tighten up. Perfect fitment: work perfectly with small pod lights work lights within 2” to 5” and sit at exact position, remaining sufficient clearance for hood to fully open without blocking windshield wiper.
HOZHEM #ad - Low-profile design the pods light brackets will sit low on your hood, will not block your driving view or affect the opening or closing of the hood. Wide applicationthe hood light mount brackets allow you to add more lights to increase brightness, which can be well adapted to the hood, perfectly for LED cube/pod/work light.
Package include: 2 x ditch light bracket. Materialtacoma hood light mount brackets are made from high quality metal.
KMFCDAE #ad - Fit between hood & cowl panel at windshield base, does not block windshield wiper. Does not affect the opening or closing of the hood. Cad designed, cnc cut, bent to perfection providing a seamless fit for 4runner 2010+.
KANGIKX #ad - Material ditch light mounting bracket made of high quality metal, formed with CNC cut, black powder coating, rustproof, waterproof, and anti-corrosion. Easy to install no drilling needed, simple bolt-on installation, you only need a wrench or socket.
Hand tool installation time: less than 1 hour. Low-profile designthe led pods brackets will sit low on your hood, will not block your driving view or affect the opening or closing of the hood.
iJDMTOY #ad - Made with 3mm thick black powder-coated stainless steel plate. Instead of just one piece of the LED pod, you can support a pair of two LED pods for each side.
1. GS Power
#adGS Power Engine Hood Hinge Ditch Brackets for mounting Auxiliary Off-Road LED Pod Work Light. Fit Between Hood & Cowl Panel at Windshield Base. Compatible with 2016-2020 3rd Gen Toyota Tacoma
#adMore information #ad
| Brand | GS Power #ad |
| Manufacturer | GS Power #ad |
| Part Number | TCEH16P |
More information #ad
2. Nilight
#ad2 Years Warranty,Black, Nilight 90025B Led Light Bar Mounting Brackets 2pcs Universal Hood Led Work Light led Pods Mount Bracket Clamp Holder for SUV Truck Off Road Installed No Need Drilling
#adMore information #ad
Made of 304 stainless steel, can ensure absolute anti-rust, the surface covered with rubber anti-rust paint, anti-corrosion.| Brand | Nilight #ad |
| Manufacturer | Nilight #ad |
| Height | 3 Inches |
| Length | 1 Inches |
| Weight | 0.22 Pounds |
| Width | 3 Inches |
| Part Number | 90025B |
| Model | 90025B |
| Warranty | 2 Years Warranty |
More information #ad
3. Nilight
#ad2 Years Warranty 90045B, Nilight 2PCS Side Pillar Mounting Brackets LED Metal Mounting Brackets For UTV Off Road 2014-2018 POLARIS RZR XP 1000 RZR 900
#adHigh-quality material: side pillar Mounting Brackets made of high-quality metal, the surface is black powder coating, solid and waterproof.
More information #ad
Wide compatible: it compatible with 12w/18w/20w/27w/45W/48W LED pod, can be used with most round or square LED lights. Easy to install: pre-drilled holes, no modification or drilling required, the installation bracket ensures secure fixed on the LED light to your vehicle. Long service life.| Brand | Nilight #ad |
| Manufacturer | Nilight #ad |
| Height | 2.3 Inches |
| Length | 6 Inches |
| Width | 3.3 Inches |
| Part Number | 90045B |
| Model | 90045B |
| Warranty | 2 Years Warranty |
More information #ad
4. Nilight
#ad2 Years Warranty, Nilight 2PCS Universal Adjustable Pillar Hood Led Work Light Mount Bracket Clamp Holder for Off Road Jeep Truck SUV Installing Without Drilling, LED Light Bar Mounting Bracket
#ad2 x hex Allen wrench. The clamp kit comes with anti-slip teeth and rubber pad to make sure a firm installation and no scratches left on the surface of the hood. As only the max limit of the clamp board thickness on the vehicle is within 8mm.
More information #ad
High compatibility: can used to mount different thickness of work lights, fog lights, driving lights etc. Durable material: made of sturdy 304 stainless steel, protecting itself well from corrosion and rust in bad weather. Free adjustability: you’re able to freely adjust 180°up and down and 60°left and right to make sure your light is at the exact lighting direction and at a perfect lighting angle.| Brand | Nilight #ad |
| Manufacturer | Niligh #ad |
| Height | 1.57 Inches |
| Length | 4.33 Inches |
| Width | 1.97 Inches |
| Part Number | 90043B |
| Model | 90043B |
| Warranty | 2 Years Warranty |
More information #ad
5. Rago Fabrication
#adDitch Light Bracket Extensions Pair | Compatible with Most Manufacturers Ditch Light Brackets | Made in The USA | Rago Fabrication | Quick & Easy Installation
#adOur extension is compatible with Rago's Ditch light brackets & with most ditch light brackets on the market.
More information #ad
No hardware is needed. Simply attach them onto your existing ditch light brackets, and you're good to go. Premium craftsmanship - high precision laser aligning and cutting is used to ensure that our Ditch light Bracket Extensions stay in place on rugged trails. Easy installation - these bracket extensions are easy to install, and can be done in minutes. Compatibility - our ditch bracket extensions are suitable for most SUVs, truck, and Jeeps. Perfect fitment - our brackets extensions do not interfere with the opening of your hood.
| Brand | Rago Fabrication #ad |
| Manufacturer | Rago Fabrication #ad |
| Height | 1 Inches |
| Length | 12 Inches |
| Width | 9 Inches |
| Part Number | RACCDITEXT |
| Model | RACCDITEXT |
| Warranty | Manufacturer warranty for 1 year from purchase. |
More information #ad
6. Nilight
#adNilight Ditch Light Brackets Hood Mount Brackets for Auxiliary Offroad LED Pod Light Work Light on 2nd Gen Toyota Tacoma 2005-2015,2 Years Warranty
#adSimple installation: just firstly remove hood hinge mount bolts, line up ditch light bracket to the mounting holes, and then bolt on and tighten up. Perfect fitment: work perfectly with small pod lights work lights within 2” to 5” and sit at exact position, remaining sufficient clearance for hood to fully open without blocking windshield wiper.
More information #ad
Sturdy built with thick metal, ensures it a stable mount without vibration while driving. Note: remove and bolt back on each hood hinge bolt one by one instead of entirely remove both bolts at a time to prevent hood become misaligned and add on extra work. Durable coating: made of quality powder coating, no fading or chipped paints, anti-rust.| Brand | Nilight #ad |
| Manufacturer | Nilight #ad |
| Height | 4 Inches |
| Length | 9 Inches |
| Width | 2 Inches |
| Part Number | 90058B |
| Model | 90058B |
| Warranty | 2 Years Warranty |
More information #ad
7. HOZHEM
#adHOZHEM Hood Hinge Ditch LED Light Mount Bracket for 2016-2021 Toyota Tacoma 3rd Gen Offroad Hood Pod Work Light Mount Brackets
#adPackage include: 2 x ditch light bracket. Materialtacoma hood light mount brackets are made from high quality metal.
More information #ad
Formed with cnc cut, powder-coated with a durable black semi-gloss texture. No drilling or cutting required. The ditch light mount brackets are directly installed on the engine hood. Vehicle fitmenttacoma ditch light mount bracket compatible with Toyota Tacoma 2016 2017 2018 2019 2020 2021. Simple installationeasy to install. Sturdy construction for long time use. Only wrench or socket is needed.| Brand | HOZHEM #ad |
| Manufacturer | HOZHEM #ad |
| Part Number | 785957930029 |
| Model | SAMJIA-02 |
| Warranty | -. |
More information #ad
8. KMFCDAE
#adKMFCDAE 4Runner Ditch Light Bracket LED Pods Hood Mount Brackets Compatible with Toyota 4Runner 2010+
#adMore information #ad
Mount to hood hinge w/stock bolt, easy installation, no hardware or drilling needed. Hood can fully open with light mounted. Used for mounting auxiliary off-road LED Pod Work Light so to wider visible.| Brand | KMFCDAE #ad |
| Manufacturer | KMFCDAE #ad |
| Part Number | 4RRZJ |
| Model | 4RRZJ |
More information #ad
9. KANGIKX
#adKANGIKX Hood Hinge Ditch Light Mount Brackets for Auxiliary Offroad Pod Work Light. Ditch Hood Light Brackets Compatible with Toyota Tacoma 2016-2021
#adHand tool installation time: less than 1 hour. Low-profile designthe led pods brackets will sit low on your hood, will not block your driving view or affect the opening or closing of the hood.
More information #ad
Featureallows you to mount the hood on the corner of the hood without affecting the opening or closing of the hood Beautiful appearance, low profile design. Designed to ride at night or even on the road behind to improve safety. Can be used in harsh environment. Fitment tacoma ditch light brackets compatible with Toyota Tacoma 2016 2017 2018 2019 2020 2021.| Brand | KANGIKX #ad |
| Manufacturer | KANGIKX #ad |
| Height | 1.57 Inches |
| Length | 9.45 Inches |
| Width | 4.72 Inches |
| Part Number | JL-010B |
| Model | JL-010B |
More information #ad
10. iJDMTOY
#adIJDMTOY Add-On Dual Pod Light Mounting Brackets for Truck SUV Hood Hinge or A-Pillar Mount LED Pod Light System
#adMore information #ad
Good for a-pillar, hood hinge or in front of the windshield off-road LED DRL/driving light upgrade. Universal fit for most lED light applications such as Rigid, Baja, RC, etc.| Brand | iJDMTOY #ad |
| Manufacturer | iJDMTOY Auto Accessories #ad |
| Weight | 0.73 Pounds |
| Part Number | AA3609 |
| Model | Good for 3-Inch 2x2 2x3 Auxiliary Cubes |
More information #ad
